VN808SR
| Parameters | |
|---|---|
| Max Output Current | 700mA |
| Supply Voltage-Max (Vsup) | 45V |
| Power Supplies | 10.5/32V |
| Supply Voltage-Min (Vsup) | 10.5V |
| Interface | On/Off |
| Nominal Supply Current | 12mA |
| Output Configuration | High Side |
| Power Dissipation | 96W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~45V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 100 μs |
| Rds On (Typ) | 150m Ω |
| Turn Off Time | 150 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-36 Exposed Bottom Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 8 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN808 |
| Pin Count | 36 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
VN808SR Overview
It's?packaged?in?the way?of?a?Tube.This file is included in package PowerSO-36 Exposed Bottom Pad.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The LED driver has a total of 8 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Auto Restart, Status Flag.It comes under the family of VN808.A total of 36 terminations have been found in it.It is necessary to use the 36 pins in order to operate the LED driver.It consists of 8 functions.As a result, the maximum output current is reduced to 700mA in order to meet the operation requirements.Using a voltage of 24V allows for high efficiency.Surface Mount is mounted in the way of this LED driving board.The LED driver has a total of 36 pins.Currently, the LED driving board has 150mOhm resistance.The VIPower? series includes this electrical component.As a result, the output current is set to 700mA.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In this case, Vsup (maximum supply voltage) is set to 45V.A normal operation requires that the supply voltage (Vsup) remain above 10.5V.This part has a power supply of 10.5/32V.It operates at a maximum current of 12mA.
VN808SR Features
Supplied from 24V
Resistance of 150mOhm
VN808SR Applications
There are a lot of STMicroelectronics VN808SR Power Switches ICs applications.
- USB Power Distribution
- Wearable Devices
- Solid State Drivers
- Portable/Handheld Devices
- Low Voltage I/O System Power
- Wireless Headsets
- Set-top-box
- HDD, SSD
- USB Power Distribution
- Notebook and Tablet Computers
