VN808SR13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 8 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN808 |
| Pin Count | 36 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Operating Supply Voltage | 45V |
| Power Supplies | 10.5/32V |
| Interface | On/Off |
| Nominal Supply Current | 12mA |
| Output Configuration | High Side |
| Power Dissipation | 96W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 10.5V |
| Max Input Voltage | 45V |
| Output Current per Channel | 700mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~45V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 100 μs |
| Rds On (Typ) | 150m Ω |
| Drain to Source Resistance | 280mOhm |
| Turn Off Time | 150 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN808SR13TR Overview
Tape & Reel (TR) is the way it's packaged.It's included in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package.The LED driver is mounted as Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.There is a default setting of 8 for output.The LED driving board operates with a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.Features of the lighting driver are Auto Restart, Status Flag.It belongs to the family VN808.It contains 36 terminations.During operation, the 36 pins are used.It has 8 functions.Maximum output current falls to 1.7A when operation criteria are met.The supply voltage can be 24V for high efficiency.It is positioned in the direction of Surface Mount.This LED driver is equipped with a total of 36 pins.150mOhm is the resistance of the lighting driver.This electrical component is included in the VIPower? series.The output current is set to 700mA in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part is powered by 10.5/32V.In order to optimize the efficiency of the supply voltage, it should be set to 45V.As far as input voltage goes, its maximum is 45V volts.The minimum input voltage is 10.5V volts.For its operation, a maximum current requirement of 12mA is required.
VN808SR13TR Features
Supplied from 24V
Resistance of 150mOhm
VN808SR13TR Applications
There are a lot of STMicroelectronics VN808SR13TR Power Switches ICs applications.
- Portable GPS Device
- Smartphone and PDA
- HDD, SSD
- Wireless Modem Data Cards
- Portable Music Players
- HDD and SSD
- Handheld Devices
- USB Ports/Hubs
- Solid-State Drives
- Low Voltage I/O System Power
