VN808TR-32-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-36 Exposed Bottom Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 8 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | VN808 |
| Pin Count | 36 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Operating Supply Voltage | 24V |
| Supply Voltage-Max (Vsup) | 45V |
| Power Supplies | 10.5/32V |
| Interface | On/Off |
| Nominal Supply Current | 12mA |
| Output Configuration | High Side |
| Power Dissipation | 96W |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 1A |
| Rise Time | 50μs |
| Turn-Off Delay Time | 150 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~45V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 150m Ω |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN808TR-32-E Overview
The package is in the form of a Tape & Reel (TR).This package is included in PowerSO-36 Exposed Bottom Pad.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.There are 8 outputs available on this lighting driver.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.As far as features are concerned, the LED driving board has Auto Restart, Status Flag.As you can see, it comes from the VN808 family.As a result, there are 36 terminations.During operation, the 36 pins are used.It has 8 functions.It is necessary to reduce the maximum output current to 1.7A to meet the operation criteria.A supply voltage of 24V leads to high efficiency.Surface Mount is mounted in the way of this lighting driver.It is equipped with a total of 36 pins.160mOhm is the resistance of the lighting driver.These electrical components are part of the VIPower? series.This case has the output current set to 1A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In this LED driver, the maximum supply voltage is configured to be 45V (Vsup).In this part, the power supply is set to 10.5/32V.In order to optimize the efficiency of the supply voltage, it should be set to 24V.It requires 12mA current to operate.
VN808TR-32-E Features
Supplied from 24V
Resistance of 160mOhm
VN808TR-32-E Applications
There are a lot of STMicroelectronics VN808TR-32-E Power Switches ICs applications.
- USB Ports/Hubs
- USB3.1 Power Delivery
- USB Power Distribution
- Hard Disk Drives
- Smart Phones, Feature Phones
- Storage Drives
- Notebook and Tablet Computers
- USB Power Distribution
- Hot Swaps
- Portable GPS Device
