Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
Number of Pins |
36 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
36 |
ECCN Code |
EAR99 |
Resistance |
150mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
96W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
8 |
Supply Voltage |
24V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VN808 |
Pin Count |
36 |
Output Type |
N-Channel |
Max Output Current |
1.7A |
Operating Supply Voltage |
24V |
Power Supplies |
10.5/32V |
Interface |
On/Off |
Nominal Supply Current |
12mA |
Output Configuration |
High Side |
Power Dissipation |
96W |
Output Current |
700mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Output Current per Channel |
700mA |
Nominal Input Voltage |
45V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
10.5V~45V |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Number of Drivers |
8 |
Turn On Time |
100 µs |
Rds On (Typ) |
150m Ω |
Drain to Source Resistance |
280mOhm |
Turn Off Time |
150 µs |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Height Seated (Max) |
3.6mm |
Length |
15.9mm |
Width |
11mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VN808TR-E Overview
It is packaged in the manner of a Tape & Reel (TR).The 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package includes it.In this case, the LED driving board is mounted as Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable operation, set the temperature to -40°C~125°C TJ.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts has been specified.The lighting driver has Auto Restart, Status Flag features.This object belongs to the VN808 family.It has a total of 36 terminations.During operation, the 36 pins are used.As far as the lighting driver is concerned, there are 8 functions.As a result, the maximum output current is reduced to 1.7A in order to meet the operation requirements.High efficiency is possible when the supply voltage is set to 24V.Surface Mount is mounted in the way of this lighting driver.There are 36 pins in total on this board.Currently, the LED driving board has 150mOhm resistance.There is an electrical component included in the VIPower? series.This case has the output current set to 700mA.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The power supply of the part is 10.5/32V.The supply voltage should be set at 24V for best efficiency.A total of 8 drivers are included in the part.
VN808TR-E Features
Supplied from 24V
Resistance of 150mOhm
VN808TR-E Applications
There are a lot of STMicroelectronics VN808TR-E Power Switches ICs applications.
- Portable Music Players
- Set-top-box
- Portable GPS Device
- Portable/Handheld Devices
- Storage Drives
- USB Protection
- Smart Phones, Feature Phones
- Wireless Headsets
- PC Cards
- Notebook and Tablet Computers