VN820-B513TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | P2PAK (4 Leads + Tab) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e0 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 65.8W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN820 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 25mA |
| Output Configuration | High Side |
| Power Dissipation | 65.8W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 13A |
| Rds On (Typ) | 40m Ω (Max) |
| Drain to Source Resistance | 80mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
VN820-B513TR Overview
The package is in the form of a Cut Tape (CT).There is a P2PAK (4 Leads + Tab) package that includes it.Surface Mount is the mounting type of the LED driver.There is a General Purpose switch type associated with it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.A voltage of Not Required is used to power it.Voltage output is N-Channel volts at maximum.The lighting driver has Auto Restart, Status Flag features.There is a VN820 family of things that it belongs to.As a result, there are 4 terminations.It is necessary to use the 5 pins in order to operate the LED driver.As far as functions are concerned, the lighting driver has 1.It is necessary to reduce the maximum output current to 9A to meet the operation criteria.The supply voltage can be 13V for high efficiency.It is mounted in the way of Surface Mount.The LED driver has a total of 4 pins.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In this case, Vsup (maximum supply voltage) is set to 36V.The power supply of the part is 8/36V.There is a maximum current requirement of 3.5mA for its operation.It has 1 drivers.
VN820-B513TR Features
Supplied from 13V
VN820-B513TR Applications
There are a lot of STMicroelectronics VN820-B513TR Power Switches ICs applications.
- Hot Swap
- Smart Phones, Feature Phones
- Notebook PC
- Portable Devices
- USB Power Distribution
- Hot-Swap Systems
- Mobile Communication Devices
- Portable/Handheld Devices
- Hot Swap
- Portable GPS Device
