VN820-E
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 65.8W |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN820 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Power Dissipation | 65.8W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 13A |
| Rds On (Typ) | 40m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN820-E Overview
It is packaged in the form of a Tube.The Pentawatt-5 (Vertical, Bent and Staggered Leads) package contains it.The mounting type of the LED driver is Through Hole.This switch is of type General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.A supply voltage of Not Required is required for it to operate.The maximum output voltage is N-Channel volts.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.There is a VN820 family of things that it belongs to.It contains 5 terminations.5 pins are used for operation.Currently, the lighting driver has a total of 1 functions.The maximum output current drops to 9A in order to meet the operation criteria.High efficiency is possible at 13V supply voltage.The lighting driver is mounted in the way of Through Hole.The LED driver has a total of 5 pins.The output current is set to 9A in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The Vsup value (maximum supply voltage) is set to 36V.This part has a power supply of 8/36V volts.It is recommended that the supply voltage be set at 13V in order to achieve maximum efficiency.
VN820-E Features
Supplied from 13V
VN820-E Applications
There are a lot of STMicroelectronics VN820-E Power Switches ICs applications.
- HDD and SSD
- Portable GPS
- Portable GPS Device
- Set-top-box
- Notebook and Tablet Computers
- USB Protection
- Handheld Devices
- Hot Swaps
- PC Card Hot Swap
- Storage (HDDs, SSDs)
