VN820B5-E
| Parameters | |
|---|---|
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Power Dissipation | 65.8W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 13A |
| Rds On (Typ) | 40m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 4.8mm |
| Length | 10.4mm |
| Width | 9.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | P2PAK (4 Leads + Tab) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 65.8W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN820 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
VN820B5-E Overview
The package is in the form of a Tube.This package is included in P2PAK (4 Leads + Tab).Mounting type Surface Mount is selected for the LED driving board.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.In order to operate, it requires a voltage supply of Not Required.It has a maximum output voltage of N-Channel volts.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.There is a VN820 family of things that it belongs to.A total of 4 terminations have been recorded.In order to operate, 5 pins are used.Currently, the lighting driver has a total of 1 functions.As a result, the maximum output current is reduced to 9A in order to meet the operation requirements.Using a voltage of 13V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.A total of 4 pins are present on it.When this case is used, the output current is set to 9A.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In this LED driver, the maximum supply voltage is configured to be 36V (Vsup).There is a voltage supply of 8/36V volts on this part.When using this LED driving board, it is recommended that the supply voltage is set to 13V.3.5mA is the maximum current required to operate it.Drivers for this part number 1 are available.
VN820B5-E Features
Supplied from 13V
VN820B5-E Applications
There are a lot of STMicroelectronics VN820B5-E Power Switches ICs applications.
- Low Voltage I/O System Power
- Notebook PC
- USB3.1 Power Delivery
- Portable GPS Device
- Solid-State Drives
- Wearable Devices
- Set-top-box
- Hot-Swap Systems
- PC Cards
- Mobile Communication Devices
