VN820PT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 40mOhm |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 65.8W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN820 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 25mA |
| Output Configuration | High Side |
| Power Dissipation | 65.8W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 9A |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 13A |
| Rds On (Typ) | 40m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.63mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN820PT Overview
As a result, it is packaged in the form of a Tube.In the TO-252-5, DPak (4 Leads + Tab), TO-252AD package, it is included.Mounting type Surface Mount is selected for the LED driving board.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.There is a default setting of 1 for output.A supply voltage of Not Required is required for it to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.Features of the lighting driver are Auto Restart, Status Flag.The VN820 family contains this object.It has a total of 4 terminations.5 pins are used for operation.There are 1 functions of the LED driver.The maximum output current is reduced to 9A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.This lighting driver is mounted in the way of Surface Mount.There are 4 pins in total on this board.It has 40mOhm resistance.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage is set to 36V.8/36V is the power supply of the part.For its operation, a maximum current requirement of 3.5mA is required.
VN820PT Features
Supplied from 13V
Resistance of 40mOhm
VN820PT Applications
There are a lot of STMicroelectronics VN820PT Power Switches ICs applications.
- USB Power Distribution
- USB Protection
- Solid-State Drives
- Portable GPS Device
- Notebook PC
- PDAs
- Portable Music Players
- Wireless/Networking Cards
- Hot-Swap Systems
- Set-Top Boxes
