VN820PT13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 40mOhm |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 65.8W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN820 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 25mA |
| Output Configuration | High Side |
| Power Dissipation | 65.8W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 9A |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 13A |
| Rds On (Typ) | 40m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.63mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN820PT13TR Overview
It is packaged in the manner of a Tape & Reel (TR).There is a package for it in the TO-252-5, DPak (4 Leads + Tab), TO-252AD package.The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts on this LED driver.There are Auto Restart, Status Flag features available on the LED driving board.It is a member of the VN820 family.As a result, there are 4 terminations.The operation is carried out using the 5 pins.Currently, the lighting driver has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 9A.Supply voltages of 13V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.In total, it has 4 pins.Lighting drivers with 40mOhm resistance are used.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The maximum supply voltage for this LED driver is 36V (Vsup).It has a power supply of 8/36V.It has a maximum current requirement of 3.5mA.
VN820PT13TR Features
Supplied from 13V
Resistance of 40mOhm
VN820PT13TR Applications
There are a lot of STMicroelectronics VN820PT13TR Power Switches ICs applications.
- Various applications equipped with buttons
- Wireless Modem Data Cards
- USB3.1 Power Delivery
- Hot Swap
- Wireless Headsets
- Set-Top Boxes
- USB Power Distribution
- Hot Swaps
- USB Ports/Hubs
- HDD and SSD
