VN820PTTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 40mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 65.8W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN820 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Power Dissipation | 65.8W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 9A |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 13A |
| Rds On (Typ) | 40m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN820PTTR-E Overview
The LED driver's packaged as a Tape & Reel (TR).It's included in the TO-252-5, DPak (4 Leads + Tab), TO-252AD package.Mounting type Surface Mount is selected for the LED driving board.There is a General Purpose switch type associated with it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.It is possible to use 1 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.The maximum output voltage is N-Channel volts.It is equipped with Auto Restart, Status Flag features.It is part of the VN820 family of LED drivers.A total of 4 terminations can be found in it.It is necessary to use the 5 pins in order to operate the LED driver.It has 1 functions.The maximum output current must drop to 9A to meet the operation criteria.The supply voltage can be 13V for high efficiency.Surface Mount is mounted in the way of this LED driving board.It is equipped with a total of 4 pins.Currently, the LED driving board has a resistance of 40mOhm ohms.Electrical components such as this are included in the VIPower? series.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).This part's power supply is 8/36V.Optimal efficiency requires a voltage of 13V.For its operation, a current of 3.5mA is required.
VN820PTTR-E Features
Supplied from 13V
Resistance of 40mOhm
VN820PTTR-E Applications
There are a lot of STMicroelectronics VN820PTTR-E Power Switches ICs applications.
- Wireless Headsets
- Telecom and Network Systems
- Storage (HDDs, SSDs)
- Smart Phones, Feature Phones
- Solid-State Drives
- USB Power Distribution
- Portable GPS
- Portable Video Game Players
- USB Protection
- HDD and SSD
