VN820SP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 65.8W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN820 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 25mA |
| Output Configuration | High Side |
| Power Dissipation | 65.8W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 13A |
| Rds On (Typ) | 40m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN820SP Overview
It is packaged in the manner of a Tube.Package PowerSO-10 Exposed Bottom Pad contains it.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It has a total of Auto Restart, Status Flag features.It is a member of the VN820 family.There are 10 terminations in it.The 10 pins are used for the operation of the system.It has 1 functions.The maximum output current must drop to 9A to meet the operation criteria.The supply voltage can be 13V for high efficiency.The lighting driver is mounted in the way of Surface Mount.A total of 10 pins are included in this LED driver.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).8/36V is the power supply of the part.It is recommended that the supply voltage be set at 13V in order to achieve maximum efficiency.It requires a maximum current requirement of 3.5mA.
VN820SP Features
Supplied from 13V
VN820SP Applications
There are a lot of STMicroelectronics VN820SP Power Switches ICs applications.
- Hot Swap
- Wireless/Networking Cards
- USB Ports/Hubs
- Storage Drives
- Notebook PC
- USB3.1 Power Delivery
- PC Card Hot Swap
- Portable/Handheld Devices
- Hot Swap
- Notebook and Tablet Computers
