VN820SP-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 65.8W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN820 |
| Pin Count | 10 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Power Dissipation | 65.8W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 13A |
| Rds On (Typ) | 40m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN820SP-E Overview
Tube is the way it's packaged.It is included with the PowerSO-10 Exposed Bottom Pad package as well.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~150°C TJ.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.Auto Restart, Status Flag features are available on the lighting driver.It belongs to the family VN820.It contains 10 terminations.10 pins are used for operation.As far as functions are concerned, the lighting driver has 1.The maximum output current drops to 9A in order to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.Surface Mount is mounted in the way.A total of 10 pins are present on it.In this case, the output current will be set to 30A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The maximum supply voltage for this lighting driver is set to 36V (Vsup).A 8/36V power supply is used by the part.In order to optimize the efficiency of the supply voltage, it should be set to 13V.It requires a maximum current requirement of 3.5mA.There are 1 drivers associated with this part.
VN820SP-E Features
Supplied from 13V
VN820SP-E Applications
There are a lot of STMicroelectronics VN820SP-E Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Notebook PC
- Low Voltage I/O System Power
- Wearable Devices
- Mobile Communication Devices
- Set-top-box
- Gaming
- Hot Swaps
- Hot-Swap Systems
- USB Protection
