Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
PowerSO-10 Exposed Bottom Pad |
Number of Pins |
10 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e3 |
Feature |
Auto Restart, Status Flag |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
65.8W |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
13V |
Base Part Number |
VN820 |
Pin Count |
10 |
Output Type |
N-Channel |
Max Output Current |
9A |
Supply Voltage-Max (Vsup) |
36V |
Power Supplies |
8/36V |
Supply Voltage-Min (Vsup) |
5.5V |
Interface |
On/Off |
Nominal Supply Current |
25mA |
Output Configuration |
High Side |
Power Dissipation |
65.8W |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
3.5mA |
Input Type |
Non-Inverting |
Turn On Delay Time |
30 μs |
Switch Type |
General Purpose |
Turn-Off Delay Time |
30 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Number of Drivers |
1 |
Output Peak Current Limit-Nom |
13A |
Rds On (Typ) |
40m Ω (Max) |
Drain to Source Resistance |
80mOhm |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SOURCE |
Height Seated (Max) |
3.75mm |
Length |
9.4mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
VN820SP13TR Overview
The package is in the form of a Cut Tape (CT).There is a PowerSO-10 Exposed Bottom Pad package that includes it.The LED driver is mounted as Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.I believe it belongs to the VN820 family.In total, there are 10 terminations.The operation is carried out using the 10 pins.The LED driver has 1 functions.To meet the operation criteria, the maximum output current drops to 9A.With a supply voltage of 13V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.In total, it has 10 pins.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The LED driver is configured with a maximum supply voltage of 36V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 5.5V.This part's power supply is 8/36V.3.5mA is the maximum current required to operate it.There are 1 drivers available for this part.
VN820SP13TR Features
Supplied from 13V
VN820SP13TR Applications
There are a lot of STMicroelectronics VN820SP13TR Power Switches ICs applications.
- Portable/Handheld Devices
- Hot Swap
- Wireless Modem Data Cards
- Hot Swap
- Wearable Devices
- Portable Devices
- USB Ports/Hubs
- Portable Video Game Players
- Telecom and Network Systems
- Notebook and Tablet Computers