VN820SPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 65.8W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN820 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Power Dissipation | 65.8W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 13A |
| Rds On (Typ) | 40m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN820SPTR-E Overview
The package is in the form of a Tape & Reel (TR).It is included in the package PowerSO-10 Exposed Bottom Pad.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.As a default, the output is set to 1.A supply voltage of Not Required is required for it to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.It has a total of Auto Restart, Status Flag features.It is a member of the VN820 family.As a result, there are 10 terminations.10 pins are used for operation.It has 1 functions.The maximum output current must drop to 9A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13V.As a result, it is mounted in the manner of Surface Mount.10 pins are equipped with it.This electrical component can be found in the VIPower? series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In this case, Vsup (maximum supply voltage) is set to 36V.There is a voltage supply of 8/36V volts on this part.A supply voltage of 13V is recommended for maximum efficiency.It has a maximum current requirement of 3.5mA.
VN820SPTR-E Features
Supplied from 13V
VN820SPTR-E Applications
There are a lot of STMicroelectronics VN820SPTR-E Power Switches ICs applications.
- Telecom and Network Systems
- Wireless Modem Data Cards
- Storage Drives
- Notebook and Tablet Computers
- USB Ports/Hubs
- Smart Phones, Feature Phones
- Portable Music Players
- Notebook PC
- Smartphone and PDA
- USB Power Distribution
