VN920-B5
| Parameters | |
|---|---|
| Series | VIPower™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 16MOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96.1W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Current Rating | 75A |
| Base Part Number | VN920 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 30A |
| Operating Supply Voltage | 41V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 25mA |
| Output Configuration | High Side |
| Power Dissipation | 96.1W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 16m Ω (Max) |
| Drain to Source Resistance | 55mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 5.03mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | P2PAK (4 Leads + Tab) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
VN920-B5 Overview
It is packaged in the form of a Tube.This file is included in package P2PAK (4 Leads + Tab).In this case, the LED driving board is mounted as Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The lighting driver has a total of 1 outputs that are available for use.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.It is equipped with Auto Restart features.There is a VN920 family of things that it belongs to.There are 4 terminations in it.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 30A to meet the operation criteria.A supply voltage of 13V leads to high efficiency.The LED driving board is mounted in the way of Surface Mount.A total of 4 pins are included in this LED driver.It has a resistance of 16MOhm.It is part of the VIPower? series.When this is the case, the output current is set to 30A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).It has a power supply of 8/36V.When using this LED driving board, it is recommended that the supply voltage is set to 41V.
VN920-B5 Features
Supplied from 13V
Resistance of 16MOhm
VN920-B5 Applications
There are a lot of STMicroelectronics VN920-B5 Power Switches ICs applications.
- PC Cards
- Portable/Handheld Devices
- Smart Phones, Feature Phones
- Storage Drives
- Gaming
- HDD, SSD
- Portable Music Players
- USB Power Distribution
- Wireless Headsets
- Mobile Communication Devices
