VN920-B513TR
| Parameters | |
|---|---|
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 30A |
| Operating Supply Voltage | 41V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 25mA |
| Output Configuration | High Side |
| Power Dissipation | 96.1W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 16m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | P2PAK (4 Leads + Tab) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96.1W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN920 |
| Pin Count | 4 |
VN920-B513TR Overview
It is packaged in the manner of a Tape & Reel (TR).It is included in the package P2PAK (4 Leads + Tab).The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.A lighting driver with Auto Restart features is available.It comes under the family of VN920.A total of 4 terminations can be found in it.In order to operate, the 5 pins are used.Currently, there are 1 functions associated with the lighting driver.To meet the operation criteria, the maximum output current drops to 30A.The supply voltage of 13V is conducive to high efficiency.The lighting driver is mounted in the direction of Surface Mount.A total of 4 pins are present on it.It belongs to the VIPower? series.This case results in a 30A output current.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.Vsup (maximum supply voltage) is set to 36V.8/36V is the power supply of the part.For maximum efficiency, the supply voltage should be set to 41V.
VN920-B513TR Features
Supplied from 13V
VN920-B513TR Applications
There are a lot of STMicroelectronics VN920-B513TR Power Switches ICs applications.
- PC Card Hot Swap
- Portable/Handheld Devices
- Notebook and Tablet Computers
- Hot Swaps
- Wireless Headsets
- Portable GPS
- Smartphone and PDA
- Portable Music Players
- Wearable Devices
- Low Voltage I/O System Power
