Parameters |
Pin Count |
5 |
JESD-30 Code |
R-PSSO-G4 |
Output Type |
N-Channel |
Max Output Current |
45A |
Operating Supply Voltage |
13V |
Voltage |
36V |
Interface |
On/Off |
Element Configuration |
Single |
Nominal Supply Current |
5mA |
Current |
30A |
Output Configuration |
High Side |
Power Dissipation |
96.1W |
Output Current |
30A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
50 μs |
Switch Type |
General Purpose |
Output Current per Channel |
45A |
Turn-Off Delay Time |
50 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Number of Drivers |
1 |
Output Peak Current Limit-Nom |
45A |
Rds On (Typ) |
16m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height |
4.8mm |
Length |
10.4mm |
Width |
9.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 8 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
P2PAK (4 Leads + Tab) |
Number of Pins |
5 |
Weight |
4.535924g |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Resistance |
16mOhm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
96.1W |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
13V |
Base Part Number |
VN920 |
VN920B5-E Overview
The package is in the form of a Tube.This file is included in package P2PAK (4 Leads + Tab).The LED driver is mounted as Surface Mount.This switch is of type General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Auto Restart.I believe it belongs to the VN920 family.A total of 4 terminations can be found in it.For operation, we use the 5 pins.It contains 1 functions.To comply with the operation criteria, the maximum output current is reduced to 45A.Supply voltages of 13V allow for high efficiency.Surface Mount is mounted in the way of this lighting driver.A total of 5 pins are included in this LED driver.Currently, the LED driving board has 16mOhm resistance.Electrical components such as this are included in the VIPower? series.The output current is set to 30A in this case.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In order to achieve the best efficiency, the supply voltage should be set to 13V.It has 1 drivers in the part.
VN920B5-E Features
Supplied from 13V
Resistance of 16mOhm
VN920B5-E Applications
There are a lot of STMicroelectronics VN920B5-E Power Switches ICs applications.
- HDD and SSD
- Portable/Handheld Devices
- Solid State Drivers
- Portable GPS
- Portable GPS Device
- Various applications equipped with buttons
- USB Power Distribution
- Hot Swap
- USB Power Distribution
- Set-Top Boxes