VN920B5HTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | P2PAK (4 Leads + Tab) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 16mOhm |
| Max Power Dissipation | 96.1W |
| Base Part Number | VN920 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 30A |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 18m Ω (Max) |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN920B5HTR-E Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).Package P2PAK (4 Leads + Tab) contains it.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There are 1 outputs available on this lighting driver.It uses a supply voltage of Not Required to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.In terms of features, the LED driving board has Auto Restart.This object belongs to the VN920 family.The operation is performed through the 5 pins.It is positioned in the direction of Surface Mount.In this LED driving board, there is 16mOhm resistance.This electrical component is part of the VIPower? series.This case results in a 30A output current.In order to achieve the best efficiency, the supply voltage should be set to 36V.Its maximum input voltage is 36V volts.It requires 5.5V volts as the minimum input voltage.For its operation, a maximum current requirement of 5mA is required.
VN920B5HTR-E Features
Resistance of 16mOhm
VN920B5HTR-E Applications
There are a lot of STMicroelectronics VN920B5HTR-E Power Switches ICs applications.
- Solid State Drivers
- USB Power Distribution
- Portable Video Game Players
- Portable Devices
- Gaming
- HDD, SSD
- USB3.1 Power Delivery
- Hot-Swap Systems
- Wireless/Networking Cards
- PC Cards
