VN920D-B5
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | P2PAK (4 Leads + Tab) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 18mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96.1W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN920 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 30A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 10μA |
| Output Configuration | High Side |
| Power Dissipation | 96.1W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 10μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 18m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN920D-B5 Overview
It's?packaged?in?the way?of?a?Tube.This package is included in P2PAK (4 Leads + Tab).A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver has a total of 1 outputs.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.As far as features are concerned, the LED driving board has Auto Restart.It comes under the family of VN920.In total, there are 4 terminations.The 5 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 30A in order to meet the operation requirements.A supply voltage of 13V leads to high efficiency.This lighting driver is mounted in the way of Surface Mount.4 pins are connected to it in total.Currently, the LED driving board has a resistance of 18mOhm ohms.It is included in the VIPower? series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.For maximum efficiency, the supply voltage should be set to 36V.There is a maximum input voltage of 36V volts.As far as input voltage goes, it has a minimum of 5.5V volts.It operates at a maximum current of 10μA.
VN920D-B5 Features
Supplied from 13V
Resistance of 18mOhm
VN920D-B5 Applications
There are a lot of STMicroelectronics VN920D-B5 Power Switches ICs applications.
- USB Protection
- Hot Swap
- USB3.1 Power Delivery
- Hot Swaps
- Hard Disk Drives
- Portable Music Players
- USB Ports/Hubs
- Handheld Devices
- Wearable Devices
- Portable GPS Device
