VN920D-B513TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | P2PAK (4 Leads + Tab) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 18mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96.1W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN920 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 30A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 10μA |
| Output Configuration | High Side |
| Power Dissipation | 96.1W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 10μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 18m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN920D-B513TR Overview
It is package in Tape & Reel (TR) case.This file is included in package P2PAK (4 Leads + Tab).The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver is equipped with 1 outputs.It uses a supply voltage of Not Required to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Auto Restart features.As you can see, it comes from the VN920 family.The termination count is 4.For operation, we use the 5 pins.It contains 1 functions.As a result, the maximum output current is reduced to 30A in order to meet the operation requirements.Supply voltages of 13V allow for high efficiency.Surface Mount is mounted in the way.A total of 4 pins are included in this LED driver.There is 18mOhm resistance on the LED driver.This electrical component can be found in the VIPower? series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.When using this LED driving board, it is recommended that the supply voltage is set to 36V.As far as input voltage goes, its maximum is 36V volts.A voltage of 5.5V volts is the minimum input voltage.There is a maximum current requirement of 10μA for its operation.
VN920D-B513TR Features
Supplied from 13V
Resistance of 18mOhm
VN920D-B513TR Applications
There are a lot of STMicroelectronics VN920D-B513TR Power Switches ICs applications.
- Notebook PC
- Wearable Devices
- Portable/Handheld Devices
- Portable Video Game Players
- Wireless Modem Data Cards
- HDD and SSD
- USB3.1 Power Delivery
- PC Card Hot Swap
- HDD, SSD
- Gaming
