Parameters |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Output Peak Current Limit-Nom |
45A |
Rds On (Typ) |
18m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height Seated (Max) |
4.8mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
P2PAK (4 Leads + Tab) |
Number of Pins |
5 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Resistance |
18mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
96.1W |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Supply Voltage |
13V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VN920 |
Pin Count |
4 |
JESD-30 Code |
R-PSSO-G4 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
30A |
Interface |
On/Off |
Nominal Supply Current |
3.5mA |
Output Configuration |
High Side |
Power Dissipation |
96.1W |
Output Current |
30A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
3.5mA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
5.5V |
Max Input Voltage |
36V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
VN920DB5TR-E Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).Package P2PAK (4 Leads + Tab) contains it.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.The lighting driver has Auto Restart features.It belongs to the family VN920.A total of 4 terminations have been recorded.5 pins are used for operation.As far as functions are concerned, the lighting driver has 1.To comply with the operation criteria, the maximum output current is reduced to 30A.A supply voltage of 13V leads to high efficiency.The lighting driver is mounted in the way of Surface Mount.The LED driver has a total of 4 pins.The LED driver has 18mOhm resistance.These electrical components are part of the VIPower? series.In this case, the output current is set to 30A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.Its maximum input voltage is 36V volts.Input voltage must be at least 5.5V volts.For its operation, a current of 3.5mA is required.
VN920DB5TR-E Features
Supplied from 13V
Resistance of 18mOhm
VN920DB5TR-E Applications
There are a lot of STMicroelectronics VN920DB5TR-E Power Switches ICs applications.
- Portable GPS Device
- Portable GPS
- Storage (HDDs, SSDs)
- USB3.1 Power Delivery
- Portable Devices
- PC Card Hot Swap
- Notebook PC
- Wireless Modem Data Cards
- Hot-Swap Systems
- Gaming