VN920DSP13TR
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 16mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96.1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN920 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 25A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 30A |
| Nominal Supply Current | 25mA |
| Output Configuration | High Side |
| Power Dissipation | 96.1W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 45A |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 16m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.65mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
VN920DSP13TR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the PowerSO-10 Exposed Bottom Pad package, it is included.A Surface Mount mounting is used for the LED driving board.The switch type is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.As a default, the output is set to 1.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It has a total of Auto Restart features.The VN920 family consists of this type.As a result, there are 10 terminations.The operation is performed through the 10 pins.As far as functions are concerned, the lighting driver has 1.In this case, the LED driving board can produce only 30AV as its maximum output.The maximum output current drops to 25A in order to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.In this case, it is mounted in the way of Surface Mount.It is equipped with a total of 10 pins.16mOhm is the resistance of the lighting driver.This electrical component is part of the VIPower? series.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).The supply voltage (Vsup) should be kept above 5.5V for normal operation.A 8/36V power supply is used by the part.It requires 20μA current to operate.
VN920DSP13TR Features
Supplied from 13V
Resistance of 16mOhm
VN920DSP13TR Applications
There are a lot of STMicroelectronics VN920DSP13TR Power Switches ICs applications.
- Handheld Devices
- Various applications equipped with buttons
- HDD and SSD
- Hard Disk Drives
- USB Power Distribution
- Portable Video Game Players
- PC Card Hot Swap
- Smart Phones, Feature Phones
- Notebook and Tablet Computers
- Smartphone and PDA
