VN920DSPTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 16mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96.1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN920 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 25A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Current - Output (Max) | 30A |
| Nominal Supply Current | 20μA |
| Output Configuration | High Side |
| Power Dissipation | 96.1W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 45A |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 16m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 3.65mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN920DSPTR-E Overview
The LED driver's packaged as a Tape & Reel (TR).The PowerSO-10 Exposed Bottom Pad package includes it.In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.Auto Restart features are available on the lighting driver.It comes under the family of VN920.It consists of 10 terminations in total.For operation, 10 pins are used.It is important to note that the LED driving board has 1 functions.30AV is the maximum output of the LED driver.The maximum output current drops to 25A in order to meet the operation criteria.Using a voltage of 13V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.10 pins are equipped with it.In this LED driving board, there is 16mOhm resistance.This electrical component is included in the VIPower? series.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The maximum supply voltage for this LED driver is 36V (Vsup).This part is powered by 8/36V.In order to optimize the efficiency of the supply voltage, it should be set to 13V.It requires a maximum current requirement of 20μA.
VN920DSPTR-E Features
Supplied from 13V
Resistance of 16mOhm
VN920DSPTR-E Applications
There are a lot of STMicroelectronics VN920DSPTR-E Power Switches ICs applications.
- Notebook PC
- Portable GPS Device
- USB Power Distribution
- Telecom and Network Systems
- USB Ports/Hubs
- Wearable Devices
- Portable GPS
- USB Power Distribution
- Portable Video Game Players
- Hot Swaps
