VN920PEP-E
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Resistance | 15mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN920 |
| Pin Count | 24 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 30A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 15m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 2.4mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
VN920PEP-E Overview
The package is in the form of a Tube.This package is included in 24-PowerBSOP (0.295, 7.50mm Width).Surface Mount is the mounting type of the LED driver.General Purpose is the type of switch owned by it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There are 1 outputs available on this lighting driver.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It is equipped with Auto Restart features.It is a member of the VN920 family.A total of 24 terminations have been found in it.For operation, 24 pins are used.The LED driver has 1 functions.As a result, the maximum output current is reduced to 30A in order to meet the operation requirements.As long as the supply voltage is 13V, high efficiency can be achieved.The LED driving board is mounted in the way of Surface Mount.There are 24 pins in total on this board.Currently, the LED driving board has a resistance of 15mOhm ohms.This electrical component can be found in the VIPower? series.When this is the case, the output current is set to 30A.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to achieve the best efficiency, the supply voltage should be set to 36V.Input voltage is limited to 36V volts.There is a minimum input voltage of 5.5V volts for this LED driver.It requires 5mA current to operate.
VN920PEP-E Features
Supplied from 13V
Resistance of 15mOhm
VN920PEP-E Applications
There are a lot of STMicroelectronics VN920PEP-E Power Switches ICs applications.
- Hot Swaps
- PC Card Hot Swap
- USB Ports/Hubs
- Portable GPS
- USB3.1 Power Delivery
- PC Cards
- Wireless Headsets
- Wearable Devices
- Telecom and Network Systems
- USB Power Distribution
