Parameters |
Output Current |
30A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
5mA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
5.5V |
Max Input Voltage |
36V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Rds On (Typ) |
15m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height Seated (Max) |
2.47mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-PowerBSOP (0.295, 7.50mm Width) |
Number of Pins |
24 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Resistance |
15mOhm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
8.3W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
13V |
Terminal Pitch |
0.8mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VN920 |
Pin Count |
24 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
30A |
Operating Supply Voltage |
36V |
Interface |
On/Off |
Nominal Supply Current |
5mA |
Output Configuration |
High Side |
Power Dissipation |
8.3W |
VN920PEPTR-E Overview
It is packaged in the manner of a Tape & Reel (TR).Package 24-PowerBSOP (0.295, 7.50mm Width) contains it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.The lighting driver has Auto Restart features.The VN920 family contains this object.A total of 24 terminations have been recorded.For operation, 24 pins are used.The LED driver has 1 functions.The maximum output current must drop to 30A to meet the operation criteria.The supply voltage of 13V is conducive to high efficiency.It is positioned in the direction of Surface Mount.There are 24 pins in total on this board.Currently, the LED driving board has 15mOhm resistance.This electrical component can be found in the VIPower? series.This results in a 30A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In order to achieve the best efficiency, the supply voltage should be set to 36V.Voltage input is limited to 36V volts.The minimum input voltage is 5.5V volts.A maximum current requirement of 5mA is required for its operation.
VN920PEPTR-E Features
Supplied from 13V
Resistance of 15mOhm
VN920PEPTR-E Applications
There are a lot of STMicroelectronics VN920PEPTR-E Power Switches ICs applications.
- Wireless Modem Data Cards
- PC Cards
- Hot Swap
- Low Voltage I/O System Power
- Mobile Communication Devices
- Portable Devices
- Portable GPS
- Set-top-box
- USB Ports/Hubs
- Hard Disk Drives