VN920SO-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN920 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 30A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 16m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
VN920SO-E Overview
It's?packaged?in?the way?of?a?Tube.There is a 16-SOIC (0.295, 7.50mm Width) package that includes it.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Auto Restart features.It is part of the VN920 family of LED drivers.It contains 16 terminations.During operation, the 16 pins are used.It has 1 functions.The maximum output current is reduced to 30A to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 16 pins.This electrical component can be found in the VIPower? series.The output current is set to 30A in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In this case, Vsup (maximum supply voltage) is set to 36V.This part has a power supply of 8/36V.Optimal efficiency requires a voltage of 13V.
VN920SO-E Features
Supplied from 13V
VN920SO-E Applications
There are a lot of STMicroelectronics VN920SO-E Power Switches ICs applications.
- HDD and SSD
- Wireless Headsets
- Smartphone and PDA
- USB Protection
- Wireless/Networking Cards
- Hot Swap
- USB Power Distribution
- Hot Swaps
- HDD, SSD
- Portable/Handheld Devices
