VN920SO13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN920 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 30A |
| Operating Supply Voltage | 41V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 25mA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 16m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN920SO13TR Overview
The package is in the form of a Tape & Reel (TR).The 16-SOIC (0.295, 7.50mm Width) package includes it.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It is equipped with Auto Restart features.It comes under the family of VN920.In total, there are 16 terminations.For operation, we use the 16 pins.The LED driving board has a total of 1 functions.Maximum output current falls to 30A when operation criteria are met.A supply voltage of 13V leads to high efficiency.It is positioned in the direction of Surface Mount.In total, it has 16 pins.Electrical components such as this are included in the VIPower? series.This case has the output current set to 30A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The Vsup value (maximum supply voltage) is set to 36V.A 8/36V power supply is used by the part.In order to maximize efficiency, the supply voltage should be set at 41V.
VN920SO13TR Features
Supplied from 13V
VN920SO13TR Applications
There are a lot of STMicroelectronics VN920SO13TR Power Switches ICs applications.
- Wireless/Networking Cards
- Portable GPS Device
- USB Power Distribution
- USB Power Distribution
- Notebook PC
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- PDAs
- Smartphone and PDA
- Wearable Devices
