VN920SOTR-E
| Parameters | |
|---|---|
| Output Type | N-Channel |
| Max Output Current | 30A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 16m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN920 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
VN920SOTR-E Overview
A Tape & Reel (TR) is used to package it.There is a 16-SOIC (0.295, 7.50mm Width) package that includes it.The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.Operation is based on Not Required supply voltage.It produces a maximum output voltage of N-Channel volts at its maximum output.Auto Restart features are available on the lighting driver.The VN920 family consists of this type.As a result, there are 16 terminations.During operation, the 16 pins are used.Currently, the lighting driver has a total of 1 functions.This results in the maximum output current dropping to 30A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.The LED driving board is mounted in the way of Surface Mount.There are 16 pins in total on this board.A component of this type is included in the VIPower? series.This case results in a 30A output current.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.A maximum supply voltage of 36V is set in Vsup.In this part, the power supply is set to 8/36V.For maximum efficiency, the supply voltage should be set to 13V.
VN920SOTR-E Features
Supplied from 13V
VN920SOTR-E Applications
There are a lot of STMicroelectronics VN920SOTR-E Power Switches ICs applications.
- Smart Phones, Feature Phones
- HDD, SSD
- Notebook and Tablet Computers
- Wireless Modem Data Cards
- Mobile Communication Devices
- PC Cards
- Hot-Swap Systems
- Portable Devices
- Telecom and Network Systems
- Solid-State Drives
