VN920SP13TR
| Parameters | |
|---|---|
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 15mOhm |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96.1W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Current Rating | 5mA |
| Base Part Number | VN920 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 96.1W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 25mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 45A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 15m Ω (Max) |
| Drain to Source Resistance | 50mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
VN920SP13TR Overview
It is packaged in the form of a Tape & Reel (TR).This package is included in PowerSO-10 Exposed Bottom Pad.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There are 1 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.There are Auto Restart features available on the LED driving board.The VN920 family consists of this type.A total of 10 terminations have been recorded.For operation, 10 pins are used.The LED driver has 1 functions.With a supply voltage of 13V, high efficiency is possible.It is positioned in the direction of Surface Mount.10 pins are connected to it in total.Currently, the LED driving board has 15mOhm resistance.It is included in the VIPower? series.The output current is set to 30A in this case.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.A supply voltage of 36V is recommended for maximum efficiency.A maximum input voltage of 36V volts can be applied to it.It requires 5.5V volts as the minimum input voltage.For its operation, a maximum current requirement of 25mA is required.
VN920SP13TR Features
Supplied from 13V
Resistance of 15mOhm
VN920SP13TR Applications
There are a lot of STMicroelectronics VN920SP13TR Power Switches ICs applications.
- USB3.1 Power Delivery
- Wearable Devices
- Portable Video Game Players
- Notebook and Tablet Computers
- Wireless Modem Data Cards
- Storage Drives
- Hot Swap
- Telecom and Network Systems
- PC Cards
- Smartphone and PDA
