banner_page

VN920SPTR-E

8/36V N-Channel PMIC VIPower? Series VN920 10 Pin 13V PowerSO-10 Exposed Bottom Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VN920SPTR-E
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 921
  • Description: 8/36V N-Channel PMIC VIPower? Series VN920 10 Pin 13V PowerSO-10 Exposed Bottom Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Series VIPower™
JESD-609 Code e3
Feature Auto Restart
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 10
ECCN Code EAR99
Resistance 15mOhm
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Peripheral Drivers
Max Power Dissipation 96.1W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 250
Number of Functions 1
Supply Voltage 13V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number VN920
Pin Count 10
Number of Outputs 1
Output Type N-Channel
Operating Supply Voltage 13V
Supply Voltage-Max (Vsup) 36V
Power Supplies 8/36V
Interface On/Off
Nominal Supply Current 5mA
Output Configuration High Side
Power Dissipation 96.1W
Output Current 30A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Output Current per Channel 45A
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Rds On (Typ) 15m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height Seated (Max) 3.65mm
Length 9.4mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

VN920SPTR-E Overview


It is packaged in the form of a Tape & Reel (TR).It's included in the PowerSO-10 Exposed Bottom Pad package.It has been mounted as Surface Mount on the LED driver.This switch is of type General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There are 1 outputs available on this lighting driver.Operation is based on Not Required supply voltage.It produces a maximum output voltage of N-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Auto Restart.As you can see, it comes from the VN920 family.A total of 10 terminations have been found in it.The operation is performed through the 10 pins.There are 1 functions of the LED driver.It is possible to obtain high efficiency with a supply voltage of 13V.The lighting driver is mounted in the direction of Surface Mount.It is equipped with a total of 10 pins.15mOhm resistance is present in the lighting driver.It is included in the VIPower? series.This case results in a 30A output current.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The maximum supply voltage is set to 36V.This part has a power supply of 8/36V volts.It is recommended to set the supply voltage to 13V for optimum efficiency.

VN920SPTR-E Features


Supplied from 13V
Resistance of 15mOhm

VN920SPTR-E Applications


There are a lot of STMicroelectronics VN920SPTR-E Power Switches ICs applications.

  • Portable Devices
  • PC Card Hot Swap
  • Handheld Devices
  • USB Protection
  • PC Cards
  • Hot-Swap Systems
  • Storage Drives
  • Wearable Devices
  • USB Power Distribution
  • USB3.1 Power Delivery

Write a review

Note: HTML is not translated!
    Bad           Good