VNB10N07
| Parameters | |
|---|---|
| Length | 10.28mm |
| Width | 9.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 50W |
| Technology | MOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNB10 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 50W |
| Output Current | 7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 80ns |
| Fall Time (Typ) | 100 ns |
| Continuous Drain Current (ID) | 10A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Turn On Time | 0.9 μs |
| Output Peak Current Limit-Nom | 10A |
| Rds On (Typ) | 100m Ω (Max) |
| Drain to Source Resistance | 100mOhm |
| Turn Off Time | 6 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 4.6mm |
VNB10N07 Overview
It is package in Tube case.It's included in the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package.The LED driver is mounted as Surface Mount.There is a General Purpose switch type associated with it.The LED driver has a total of 1 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum voltage of N-Channel volts is available from the output of this LED driver.It belongs to the family VNB10.There are 2 terminations in it.For operation, we use the 3 pins.It has 1 functions.The maximum output current must drop to 10A to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.There are 4 pins in total on this board.In this LED driving board, there is 100mOhm resistance.Electrical components such as this are included in the OMNIFET?, VIPower? series.In this case, the output current will be set to 7A.It is designed to be stable at 150°C°C, which is the maximum operating temperature.Reliability is assured with a minimum working temperature of -55°C degrees Celsius.
VNB10N07 Features
Resistance of 100mOhm
VNB10N07 Applications
There are a lot of STMicroelectronics VNB10N07 Power Switches ICs applications.
- Portable/Handheld Devices
- Gaming
- Hot Swaps
- Wireless Headsets
- Storage Drives
- Smartphone and PDA
- Various applications equipped with buttons
- Notebook PC
- PC Card Hot Swap
- PC Cards
