VNB10N0713TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Max Power Dissipation | 50W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | VNB10 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 50W |
| Output Current | 7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 0.9 μs |
| Output Peak Current Limit-Nom | 10A |
| Rds On (Typ) | 100m Ω (Max) |
| Turn Off Time | 6 μs |
| Built-in Protections | OVER CURRENT; THERMAL; ZENER CLAMP |
| Height Seated (Max) | 4.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNB10N0713TR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It's included in the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package.The lighting driver has the mounting type Surface Mount.General Purpose is the type of switch owned by it.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.It produces a maximum output voltage of N-Channel volts at its maximum output.This object belongs to the VNB10 family.As a result, there are 2 terminations.The operation is performed through the 3 pins.As far as the lighting driver is concerned, there are 1 functions.The maximum output current is reduced to 10A to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.A total of 4 pins are included in this LED driver.100mOhm resistance is present in the lighting driver.This electrical component can be found in the OMNIFET?, VIPower? series.The output current is set to 7A in this case.Optimal efficiency requires a voltage of 18V.For its operation, a current of 250μA is required.
VNB10N0713TR Features
Resistance of 100mOhm
VNB10N0713TR Applications
There are a lot of STMicroelectronics VNB10N0713TR Power Switches ICs applications.
- Wearable Devices
- Wireless Modem Data Cards
- USB3.1 Power Delivery
- PDAs
- USB Ports/Hubs
- Solid-State Drives
- Portable GPS Device
- Notebook and Tablet Computers
- USB Power Distribution
- Hot-Swap Systems
