VNB10N07TR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 50W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | VNB10 |
| Pin Count | 3/2 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 50W |
| Output Current | 7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 0.9 μs |
| Output Peak Current Limit-Nom | 10A |
| Rds On (Typ) | 100m Ω (Max) |
| Turn Off Time | 6 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 4.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNB10N07TR-E Overview
The package is in the form of a Tape & Reel (TR).There is a TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package that includes it.A Surface Mount mounting is used for the LED driving board.General Purpose is the type of switch owned by it.The lighting driver has a total of 1 outputs that are available for use.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It belongs to the VNB10 family.It consists of 2 terminations in total.In order to operate, the 3 pins are used.Currently, the lighting driver has a total of 1 functions.In order to meet the operation criteria, the maximum output current drops to 10A.The LED driving board is mounted in the way of Surface Mount.In total, it has 3/2 pins.The LED driver has 100mOhm resistance.This electrical component is part of the OMNIFET?, VIPower? series.This case has the output current set to 7A.It is recommended to set the supply voltage to 18V for optimum efficiency.It requires a maximum current requirement of 250μA.
VNB10N07TR-E Features
Resistance of 100mOhm
VNB10N07TR-E Applications
There are a lot of STMicroelectronics VNB10N07TR-E Power Switches ICs applications.
- Storage Drives
- USB Power Distribution
- Wearable Devices
- USB3.1 Power Delivery
- Portable GPS Device
- Solid State Drivers
- Low Voltage I/O System Power
- Portable Video Game Players
- Notebook and Tablet Computers
- PDAs
