VNB14NV04
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 74W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNB14 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 74W |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 12A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Turn On Time | 4.5 μs |
| Output Peak Current Limit-Nom | 18A |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 35mOhm |
| Turn Off Time | 25 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 4.826mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNB14NV04 Overview
Tube is the way it's packaged.In the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package, it is included.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the type of switch owned by it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver has a total of 1 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It belongs to the VNB14 family.It has a total of 2 terminations.It contains 1 functions.The maximum output current drops to 18A in order to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.A total of 3 pins are present on it.The LED driver has 35mOhm resistance.These electrical components are part of the OMNIFET?, VIPower? series.This results in a 12A output current.For maximum efficiency, the supply voltage should be set to 18V.The maximum current required for its operation is 100μA.
VNB14NV04 Features
Resistance of 35mOhm
VNB14NV04 Applications
There are a lot of STMicroelectronics VNB14NV04 Power Switches ICs applications.
- Notebook PC
- Hot Swap
- Telecom and Network Systems
- PC Card Hot Swap
- USB Ports/Hubs
- Set-Top Boxes
- PDAs
- Smartphone and PDA
- USB Power Distribution
- Portable GPS
