VNB14NV0413TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 74W |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNB14 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 6.8V |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 74W |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 250 ns |
| Switch Type | General Purpose |
| Rise Time | 350ns |
| Fall Time (Typ) | 150 ns |
| Turn-Off Delay Time | 1.35 μs |
| Continuous Drain Current (ID) | 12A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Turn On Time | 4.5 μs |
| Output Peak Current Limit-Nom | 18A |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 35mOhm |
| Turn Off Time | 25 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNB14NV0413TR Overview
The LED driver's packaged as a Tape & Reel (TR).The TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package includes it.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver is equipped with 1 outputs.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.The VNB14 family consists of this type.A total of 2 terminations have been recorded.The operation is carried out using the 3 pins.Currently, the lighting driver has a total of 1 functions.As a result, the maximum output current is reduced to 18A in order to meet the operation requirements.As long as the supply voltage is 5V, high efficiency can be achieved.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 3 pins.There is 35mOhm resistance on the LED driver.There is an electrical component included in the OMNIFET II?, VIPower? series.In this case, the output current is set to 12A.In order to achieve the best efficiency, the supply voltage should be set to 6.8V.
VNB14NV0413TR Features
Supplied from 5V
Resistance of 35mOhm
VNB14NV0413TR Applications
There are a lot of STMicroelectronics VNB14NV0413TR Power Switches ICs applications.
- Low Voltage I/O System Power
- PC Cards
- HDD, SSD
- Solid State Drivers
- Portable Music Players
- Hot-Swap Systems
- Wearable Devices
- Smart Phones, Feature Phones
- Portable GPS
- PC Card Hot Swap
