VNB14NV04TR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 74W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNB14 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 74W |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 80 ns |
| Switch Type | General Purpose |
| Rise Time | 350ns |
| Fall Time (Typ) | 150 ns |
| Turn-Off Delay Time | 450 ns |
| Continuous Drain Current (ID) | 14A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 4.5 μs |
| Output Peak Current Limit-Nom | 18A |
| Rds On (Typ) | 35m Ω (Max) |
| Turn Off Time | 25 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 4.826mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNB14NV04TR-E Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package, it is included.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver is equipped with 1 outputs.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.The VNB14 family consists of this type.A total of 2 terminations have been recorded.In order to operate, 3 pins are used.There are 1 functions of the LED driver.The maximum output current must drop to 18A to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.The LED driving board is equipped with a total of 3 pins.35mOhm is the resistance of the lighting driver.Electrical components such as this are included in the OMNIFET II?, VIPower? series.The output current is set to 12A in this case.For maximum efficiency, the supply voltage should be set to 18V.It operates at a maximum current of 100μA.
VNB14NV04TR-E Features
Resistance of 35mOhm
VNB14NV04TR-E Applications
There are a lot of STMicroelectronics VNB14NV04TR-E Power Switches ICs applications.
- Mobile Communication Devices
- USB Protection
- Hot Swap
- Portable Video Game Players
- HDD and SSD
- Portable Devices
- Wireless Modem Data Cards
- Hot-Swap Systems
- Portable/Handheld Devices
- USB3.1 Power Delivery
