VNB20N07
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated DC | 70V |
| Max Power Dissipation | 83W |
| Technology | MOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Current Rating | 20A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNB20 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 14A |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 83W |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 240ns |
| Fall Time (Typ) | 150 ns |
| Turn-Off Delay Time | 430 ns |
| Continuous Drain Current (ID) | 10A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Output Peak Current Limit-Nom | 20A |
| Rds On (Typ) | 50m Ω (Max) |
| Drain to Source Resistance | 50mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 4.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VNB20N07 Overview
It is packaged in the manner of a Tube.There is a TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package that includes it.It has been mounted as Surface Mount on the LED driver.General Purpose is the type of switch owned by it.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts has been specified.There are Status Flag features available on the LED driving board.It belongs to the family VNB20.In total, there are 2 terminations.In order to operate, the 3 pins are used.It is important to note that the LED driving board has 1 functions.It is necessary to reduce the maximum output current to 14A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.There are 4 pins in total on this board.These electrical components are part of the OMNIFET?, VIPower? series.This case results in a 14A output current.
VNB20N07 Features
VNB20N07 Applications
There are a lot of STMicroelectronics VNB20N07 Power Switches ICs applications.
- Hot Swaps
- Mobile Communication Devices
- Wireless Modem Data Cards
- Portable/Handheld Devices
- Wireless/Networking Cards
- Notebook PC
- USB Protection
- Smartphone and PDA
- Portable GPS Device
- Portable Video Game Players
