VNB20N07-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Max Power Dissipation | 83W |
| Base Part Number | VNB20 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 14A |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 83W |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 240ns |
| Drain to Source Voltage (Vdss) | 70V |
| Fall Time (Typ) | 150 ns |
| Nominal Input Voltage | 18V |
| Turn-Off Delay Time | 430 ns |
| Continuous Drain Current (ID) | 20A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Rds On (Typ) | 50m Ω (Max) |
| Drain to Source Resistance | 50mOhm |
| Height | 4.6mm |
| Length | 10.28mm |
| Width | 9.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNB20N07-E Overview
The LED driver's packaged as a Tube.It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.It comes under the family of VNB20.During operation, the 3 pins are used.To comply with the operation criteria, the maximum output current is reduced to 14A.It is positioned in the direction of Surface Mount.Currently, the LED driving board has 50mOhm resistance.It belongs to the OMNIFET?, VIPower? series.This case results in a 14A output current.
VNB20N07-E Features
Resistance of 50mOhm
VNB20N07-E Applications
There are a lot of STMicroelectronics VNB20N07-E Power Switches ICs applications.
- HDD, SSD
- Telecom and Network Systems
- Set-top-box
- Notebook PC
- USB3.1 Power Delivery
- Wireless Headsets
- Wireless Modem Data Cards
- Portable/Handheld Devices
- Gaming
- Hot Swap
