VNB20N0713TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Packaging | Cut Tape (CT) |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated DC | 70V |
| Max Power Dissipation | 83W |
| Technology | MOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Current Rating | 20A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNB20 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 20A |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 83W |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 240ns |
| Drain to Source Voltage (Vdss) | 70V |
| Fall Time (Typ) | 150 ns |
| Continuous Drain Current (ID) | 20A |
| Threshold Voltage | 800mV |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Output Peak Current Limit-Nom | 20A |
| Rds On (Typ) | 50m Ω (Max) |
| Drain to Source Resistance | 50mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 4.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNB20N0713TR Overview
Cut Tape (CT) is how it's packaged.The TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package includes it.It has been mounted as Surface Mount on the LED driver.General Purpose is the type of switch owned by it.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.The lighting driver has Status Flag features.It belongs to the VNB20 family.It contains 2 terminations.The 3 pins are used to operate the LED driver.The LED driver has 1 functions.The maximum output current is reduced to 20A to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.A total of 4 pins are included in this LED driver.50mOhm is the resistance of the lighting driver.It belongs to the OMNIFET?, VIPower? series.This case has the output current set to 14A.It is suitable for stable operation to operate at a maximum temperature of 150°C°C.To ensure reliability, the unit operates at a temperature of -55°C degrees Celsius.
VNB20N0713TR Features
Resistance of 50mOhm
VNB20N0713TR Applications
There are a lot of STMicroelectronics VNB20N0713TR Power Switches ICs applications.
- PC Cards
- Hot Swaps
- Wireless Headsets
- Storage Drives
- Smartphone and PDA
- Hot Swap
- Hot Swap
- Gaming
- PC Card Hot Swap
- USB3.1 Power Delivery
