VNB28N04
| Parameters | |
|---|---|
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 83W |
| Output Current | 19A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Drain to Source Voltage (Vdss) | 42V |
| Continuous Drain Current (ID) | 28A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 31V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 0.7 μs |
| Output Peak Current Limit-Nom | 28A |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 35mOhm |
| Built-in Protections | OVER CURRENT; THERMAL; ZENER CLAMP |
| Height Seated (Max) | 4.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 83W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNB28 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 19A |
VNB28N04 Overview
Tube is how it's packaged.It's included in the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.The LED driver has 1 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.Features of the lighting driver are Status Flag.The VNB28 family consists of this type.A total of 2 terminations can be found in it.The 3 pins are used to operate the LED driver.It has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 19A.The LED driving board is mounted in the way of Surface Mount.As a result, it has a total of 4 pins.The LED driver has 35mOhm resistance.Electrical components such as this are included in the OMNIFET?, VIPower? series.This case results in a 19A output current.In order to achieve the best efficiency, the supply voltage should be set to 18V.There is a maximum current requirement of 250μA for its operation.
VNB28N04 Features
Resistance of 35mOhm
VNB28N04 Applications
There are a lot of STMicroelectronics VNB28N04 Power Switches ICs applications.
- Storage Drives
- Notebook and Tablet Computers
- USB Power Distribution
- Hot-Swap Systems
- Portable Devices
- Low Voltage I/O System Power
- USB Protection
- Hot Swap
- Hot Swap
- Set-Top Boxes
