VNB28N04-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 150°C |
| Max Power Dissipation | 83W |
| Base Part Number | VNB28 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 19A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 83W |
| Output Current | 19A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 51V |
| Continuous Drain Current (ID) | 14A |
| Threshold Voltage | 3V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 31V Max |
| Drain Current-Max (Abs) (ID) | 28A |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 35mOhm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VNB28N04-E Overview
Tube is how it's packaged.In the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package, it is included.A Surface Mount mounting is used for the LED driving board.General Purpose is the type of switch owned by it.By default, it is set to output 1.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.It belongs to the VNB28 family.For operation, 3 pins are used.The maximum output current is reduced to 19A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.It has a resistance of 35mOhm.This electrical component is part of the OMNIFET?, VIPower? series.This results in a 19A output current.In order to achieve the best efficiency, the supply voltage should be set to 18V.Stable operation is possible with a maximum operating temperature of 150°C°C.There is a maximum current requirement of 250μA for its operation.
VNB28N04-E Features
Resistance of 35mOhm
VNB28N04-E Applications
There are a lot of STMicroelectronics VNB28N04-E Power Switches ICs applications.
- PC Card Hot Swap
- Hot-Swap Systems
- Solid-State Drives
- Gaming
- Portable GPS Device
- Various applications equipped with buttons
- USB3.1 Power Delivery
- Portable/Handheld Devices
- Hot Swaps
- Portable Devices
