VNB28N0413TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 83W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | VNB28 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 28A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 83W |
| Output Current | 19A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 31V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 0.7 μs |
| Output Peak Current Limit-Nom | 28A |
| Rds On (Typ) | 35m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL; ZENER CLAMP |
| Height Seated (Max) | 4.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNB28N0413TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.Surface Mount is the mounting type of the LED driver.General Purpose is the type of switch owned by it.The LED driver has 1 outputs.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.It is equipped with Status Flag features.It is a member of the VNB28 family.It has a total of 2 terminations.3 pins are used for operation.It has 1 functions.As a result, the maximum output current is reduced to 28A in order to meet the operation requirements.It is positioned in the direction of Surface Mount.As a result, it has a total of 4 pins.In this LED driving board, there is 35mOhm resistance.These electrical components are part of the OMNIFET?, VIPower? series.This case results in a 19A output current.In order to maximize efficiency, the supply voltage should be set at 18V.For its operation, a maximum current requirement of 250μA is required.
VNB28N0413TR Features
Resistance of 35mOhm
VNB28N0413TR Applications
There are a lot of STMicroelectronics VNB28N0413TR Power Switches ICs applications.
- HDD, SSD
- Wireless Modem Data Cards
- Solid-State Drives
- Hot Swap
- Portable GPS Device
- Set-top-box
- Smartphone and PDA
- Mobile Communication Devices
- HDD and SSD
- Low Voltage I/O System Power
