VNB35N07
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Weight | 329.988449mg |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 28mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 125W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNB35 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 35A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Drain to Source Voltage (Vdss) | 70V |
| Continuous Drain Current (ID) | 35A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Turn On Time | 0.8 μs |
| Output Peak Current Limit-Nom | 35A |
| Rds On (Typ) | 28m Ω (Max) |
| Drain to Source Resistance | 28mOhm |
| Built-in Protections | OVER CURRENT; THERMAL; ZENER CLAMP |
| Height Seated (Max) | 4.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNB35N07 Overview
It is package in Tube case.It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.Features of the lighting driver are Status Flag.It is a member of the VNB35 family.There are 2 terminations in it.In order to operate, the 3 pins are used.It consists of 1 functions.The maximum output current must drop to 35A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 4 pins.There is 28mOhm resistance on the LED driver.It belongs to the OMNIFET?, VIPower? series.When this case is used, the output current is set to 25A.Optimal efficiency requires a voltage of 18V.250μA is the maximum current required to operate it.
VNB35N07 Features
Resistance of 28mOhm
VNB35N07 Applications
There are a lot of STMicroelectronics VNB35N07 Power Switches ICs applications.
- PC Cards
- Hot Swaps
- HDD, SSD
- PC Card Hot Swap
- Portable Video Game Players
- Set-Top Boxes
- Gaming
- Hot Swap
- Portable Music Players
- Set-top-box
