VNB35N0713TR
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 0.8 μs |
| Output Peak Current Limit-Nom | 35A |
| Rds On (Typ) | 28m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL; ZENER CLAMP |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 28mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 125W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VNB35 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 35A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 25A |
VNB35N0713TR Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.The VNB35 family contains this object.A total of 10 terminations have been recorded.During operation, the 3 pins are used.The LED driver has 1 functions.To meet the operation criteria, the maximum output current drops to 35A.As a result, it is mounted in the manner of Surface Mount.As a result, it has a total of 10 pins.Currently, the LED driving board has 28mOhm resistance.Electrical components such as this are included in the OMNIFET?, VIPower? series.The output current is set to 25A in this case.In order to maximize efficiency, the supply voltage should be set to 18V.It operates at a maximum current of 250μA.
VNB35N0713TR Features
Resistance of 28mOhm
VNB35N0713TR Applications
There are a lot of STMicroelectronics VNB35N0713TR Power Switches ICs applications.
- Portable Music Players
- Various applications equipped with buttons
- Wireless/Networking Cards
- Solid State Drivers
- USB Power Distribution
- Storage (HDDs, SSDs)
- Set-Top Boxes
- USB Protection
- Low Voltage I/O System Power
- Hot Swaps
