VNB35N07TR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 28mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 150°C |
| Max Power Dissipation | 125W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | VNB35 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 35A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 80V |
| Continuous Drain Current (ID) | 18A |
| Threshold Voltage | 3V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 800 μs |
| Output Peak Current Limit-Nom | 35A |
| Rds On (Typ) | 28m Ω (Max) |
| Drain to Source Resistance | 28mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNB35N07TR-E Overview
A Tape & Reel (TR) is used to package it.It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.A Surface Mount mounting is used for the LED driving board.The switch type is General Purpose.The lighting driver is equipped with 1 outputs that can be used.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.The lighting driver has Status Flag features.This object belongs to the VNB35 family.In total, there are 2 terminations.During operation, the 3 pins are used.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 35A when operation criteria are met.Surface Mount is mounted in the way of this lighting driver.Currently, the LED driving board has a resistance of 28mOhm ohms.This electrical component is included in the OMNIFET?, VIPower? series.When this is the case, the output current is set to 25A.When using this LED driving board, it is recommended that the supply voltage is set to 18V.A maximum operating temperature of 150°C°C is required to provide stable operation.For its operation, a current of 250μA is required.
VNB35N07TR-E Features
Resistance of 28mOhm
VNB35N07TR-E Applications
There are a lot of STMicroelectronics VNB35N07TR-E Power Switches ICs applications.
- Portable Devices
- Hot Swaps
- Wireless Modem Data Cards
- Portable GPS
- Set-top-box
- Wireless/Networking Cards
- Handheld Devices
- Wireless Headsets
- Solid-State Drives
- Smartphone and PDA
