banner_page

VNB35NV04TR-E

N-Channel 2.54mm PMIC OMNIFET II?, VIPower? Series VNB35 3 Pin 5V TO-263-3, D2Pak (2 Leads + Tab), TO-263AB


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VNB35NV04TR-E
  • Package: TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
  • Datasheet: PDF
  • Stock: 528
  • Description: N-Channel 2.54mm PMIC OMNIFET II?, VIPower? Series VNB35 3 Pin 5V TO-263-3, D2Pak (2 Leads + Tab), TO-263AB (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
Number of Pins 3
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Series OMNIFET II™, VIPower™
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 2
ECCN Code EAR99
Resistance 13mOhm
Terminal Finish Matte Tin (Sn)
Max Power Dissipation 125W
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number VNB35
JESD-30 Code R-PSSO-G2
Number of Outputs 1
Output Type N-Channel
Max Output Current 30A
Operating Supply Voltage 18V
Interface On/Off
Element Configuration Single
Nominal Supply Current 100μA
Output Configuration Low Side
Power Dissipation 125W
Output Current 30A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 100μA
Input Type Non-Inverting
Turn On Delay Time 12 μs
Switch Type General Purpose
Rise Time 2.5μs
Drain to Source Voltage (Vdss) 70V
Fall Time (Typ) 1.5 μs
Turn-Off Delay Time 120 μs
Continuous Drain Current (ID) 80A
Ratio - Input:Output 1:1
Voltage - Load 36V Max
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage 70V
Rds On (Typ) 13m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

VNB35NV04TR-E Overview


As a result, it is packaged in the form of a Tape & Reel (TR).It's included in the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.As you can see, it comes from the VNB35 family.A total of 2 terminations can be found in it.For operation, 3 pins are used.It contains 1 functions.To meet the operation criteria, the maximum output current drops to 30A.Using a voltage of 5V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.The LED driver has 13mOhm resistance.It is included in the OMNIFET II?, VIPower? series.When this is the case, the output current is set to 30A.When using this LED driving board, it is recommended that the supply voltage is set to 18V.It requires 100μA current to operate.

VNB35NV04TR-E Features


Supplied from 5V
Resistance of 13mOhm

VNB35NV04TR-E Applications


There are a lot of STMicroelectronics VNB35NV04TR-E Power Switches ICs applications.

  • Portable GPS Device
  • Portable Video Game Players
  • Telecom and Network Systems
  • Gaming
  • Hot Swap
  • Hot-Swap Systems
  • Portable Devices
  • Mobile Communication Devices
  • Wearable Devices
  • HDD and SSD

Write a review

Note: HTML is not translated!
    Bad           Good