VNB49N0413TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 40mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 125W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNB49 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 49A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 28A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 33V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 3.8 μs |
| Output Peak Current Limit-Nom | 49A |
| Rds On (Typ) | 40m Ω (Max) |
| Turn Off Time | 24 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 4.826mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNB49N0413TR Overview
It is packaged in the form of a Tape & Reel (TR).There is a TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package that includes it.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.There is a default setting of 1 for output.The LED driving board operates at Not Required volts.A maximum voltage of N-Channel volts is available from the output of this LED driver.It has a total of Status Flag features.As you can see, it comes from the VNB49 family.It has a total of 2 terminations.It consists of 1 functions.This results in the maximum output current dropping to 49A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.4 pins are equipped with it.It has a resistance of 40mOhm.It belongs to the OMNIFET?, VIPower? series.The output current is set to 28A in this case.In order to optimize the efficiency of the supply voltage, it should be set to 18V.It requires 250μA current to operate.
VNB49N0413TR Features
Resistance of 40mOhm
VNB49N0413TR Applications
There are a lot of STMicroelectronics VNB49N0413TR Power Switches ICs applications.
- Notebook and Tablet Computers
- Gaming
- Low Voltage I/O System Power
- Solid State Drivers
- USB Protection
- PDAs
- Notebook PC
- Telecom and Network Systems
- Wireless Headsets
- Solid-State Drives
