VND05B(011Y)

8/16V N-Channel PMIC VND05 7 Pin 13V Heptawatt-7 (Horizontal, Bent and Staggered Leads)

Manufacturer: STMicroelectronics
Nocochips NO: 761-VND05B(011Y)
Package: Heptawatt-7 (Horizontal, Bent and Staggered Leads)
Datasheet: PDF
Stock: 883
Description: 8/16V N-Channel PMIC VND05 7 Pin 13V Heptawatt-7 (Horizontal, Bent and Staggered Leads) (Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	Heptawatt-7 (Horizontal, Bent and Staggered Leads)
Number of Pins	7
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
JESD-609 Code	e0
Feature	Status Flag
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	7
ECCN Code	EAR99
Resistance	200mOhm
Terminal Finish	TIN LEAD
Subcategory	Peripheral Drivers
Max Power Dissipation	59W
Terminal Position	ZIG-ZAG
Number of Functions	1
Supply Voltage	13V
Base Part Number	VND05
Pin Count	7
Number of Outputs	2
Output Type	N-Channel
Max Output Current	1.6A
Power Supplies	8/16V
Supply Voltage-Min (Vsup)	6V
Interface	On/Off
Nominal Supply Current	35μA
Output Configuration	High Side
Output Current	9A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	35μA
Input Type	Non-Inverting
Switch Type	General Purpose
Ratio - Input:Output	1:1
Voltage - Load	6V~26V
Driver Number of Bits	2
Fault Protection	Open Load Detect, Over Temperature
Output Peak Current Limit-Nom	1.6A
Rds On (Typ)	200m Ω (Max)
Built-in Protections	TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

VND05B(011Y) Overview

Tube is the way it's packaged.It is included with the Heptawatt-7 (Horizontal, Bent and Staggered Leads) package as well.It has been mounted as Through Hole on the LED driver.It owns General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.As a default, the output is set to 2.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.This object belongs to the VND05 family.A total of 7 terminations have been found in it.The 7 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.The maximum output current drops to 1.6A in order to meet the operation criteria.High efficiency is possible at 13V supply voltage.The LED driving board is mounted in the way of Through Hole.7 pins are connected to it in total.In this case, there is 200mOhm resistance in the LED driving board.The output current is set to 9A in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In order to operate normally, the supply voltage (Vsup) must be maintained above 6V.This part has a power supply of 8/16V.It has a maximum current requirement of 35μA.