VND05BSP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 59W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VND05 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.6A |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Nominal Supply Current | 35μA |
| Output Configuration | High Side |
| Power Dissipation | 59W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 35μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-SOURCE |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 6V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Load Current | 9A |
| Output Peak Current Limit-Nom | 2.6A |
| Rds On (Typ) | 200m Ω (Max) |
| Drain to Source Resistance | 200mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VND05BSP Overview
A Tube is used to package it.This file is included in package PowerSO-10 Exposed Bottom Pad.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 2.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.A lighting driver with Status Flag features is available.As you can see, it comes from the VND05 family.A total of 10 terminations have been found in it.In order to operate, 10 pins are used.The LED driver has 1 functions.The maximum output current is reduced to 1.6A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13V.In this case, it is mounted in the way of Surface Mount.In total, it has 10 pins.Currently, the LED driving board has 130mOhm resistance.As a result, the output current is set to 9A.A normal operation requires that the supply voltage (Vsup) remain above 6V.It requires 35μA current to operate.
VND05BSP Features
Supplied from 13V
Resistance of 130mOhm
VND05BSP Applications
There are a lot of STMicroelectronics VND05BSP Power Switches ICs applications.
- Storage Drives
- HDD, SSD
- USB Power Distribution
- Wearable Devices
- Hot Swap
- Portable Video Game Players
- USB Protection
- Solid State Drivers
- Handheld Devices
- Low Voltage I/O System Power
