banner_page

VND05BSP13TR

N-Channel PMIC VND05 10 Pin 13V PowerSO-10 Exposed Bottom Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VND05BSP13TR
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 303
  • Description: N-Channel PMIC VND05 10 Pin 13V PowerSO-10 Exposed Bottom Pad (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e3
Feature Status Flag
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 10
ECCN Code EAR99
Resistance 130mOhm
Terminal Finish Matte Tin (Sn) - annealed
Max Power Dissipation 59W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 13V
Base Part Number VND05
Pin Count 10
Number of Outputs 2
Output Type N-Channel
Max Output Current 1.6A
Supply Voltage-Min (Vsup) 6V
Interface On/Off
Nominal Supply Current 35μA
Output Configuration High Side
Power Dissipation 59W
Output Current 9A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 35μA
Input Type Non-Inverting
Switch Type General Purpose
Output Characteristics OPEN-SOURCE
Output Polarity TRUE
Ratio - Input:Output 1:1
Input Characteristics SCHMITT TRIGGER
Voltage - Load 6V~26V
Fault Protection Open Load Detect, Over Temperature
Load Current 180mA
Rds On (Typ) 200m Ω (Max)
Drain to Source Resistance 200mOhm
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Height Seated (Max) 3.75mm
Length 9.4mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

VND05BSP13TR Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).There is a PowerSO-10 Exposed Bottom Pad package that includes it.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 2 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Status Flag features are available on the lighting driver.I believe it belongs to the VND05 family.It has a total of 10 terminations.For operation, we use the 10 pins.There are 1 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 1.6A.With a supply voltage of 13V, high efficiency is possible.Surface Mount is mounted in the way of this lighting driver.10 pins are equipped with it.It has 130mOhm resistance.In this case, the output current is set to 9A.The supply voltage (Vsup) should be kept above 6V for normal operation.35μA is the maximum current required to operate it.

VND05BSP13TR Features


Supplied from 13V
Resistance of 130mOhm

VND05BSP13TR Applications


There are a lot of STMicroelectronics VND05BSP13TR Power Switches ICs applications.

  • Wireless Modem Data Cards
  • Hot Swap
  • USB Power Distribution
  • Hot-Swap Systems
  • HDD, SSD
  • Handheld Devices
  • HDD and SSD
  • PC Card Hot Swap
  • USB Power Distribution
  • Smart Phones, Feature Phones

Write a review

Note: HTML is not translated!
    Bad           Good